,,

Long Harmony Automation: Maintenance of the feeder

2020-06-23(1995)Views

Whether it is light industry or heavy industry, the feeder is not a short mechanical auxiliary equipment. It is used to transport materials. It is a kind of basic equipment. With the development of technology, the machine has also been greatly updated. Nowadays, it is often used in industry. It is a roller feeder, which is also classified as a high-precision machine, but the machinery will have losses when it is used. In order to extend the service life of the machine, daily maintenance must be done.

　　The feeder's daily smoothness is not limited, it can effectively improve the loss of the roller gear part, generally speaking, it is to modify the industrial butter.

After the machine is used for a period of time, many parts, especially the three-point combination, will accumulate a lot of moisture. If these moisture are not discharged in time, the machine will affect the normal operation of the machine. Don’t forget to drain the remaining moisture when maintaining the machine. You can pass the button below the water collection. After finishing the drainage work, remember to sort out the pollutants between the rollers to avoid being stuck to the gear when it is used.

Every time before using the roller feeder, it is necessary to check whether the pressure in the machine is normal, can the pressure gauge indicate the normal pressure value, check whether the structure of each part is loose, and if so, make it tight in time For solid operations, other rollers are the most severely worn parts, which need to be replaced regularly.

After the machinery has been used for more than six months, it is necessary to organize a major overhaul. It is advocated that professional overhaul personnel can be invited to complete this overhaul operation. Since the overhaul of industrial equipment involves a wide range of professional repair techniques, in order to ensure the quality of repair, Must be more careful and professional.

<Long Harmony Automation: Advantages of various feeders No> Backtrack